Twin platform bed with storage drawers White

Twin Platform Bed with Storage Drawers and Headboard

Twin Bed with Storage Drawers Vintage

Building Twin Bed with Storage Drawers

September 22, 2017 Bed Drawers

Making Twin Bed with Drawers Underneath

Twin bed with drawers underneath is enough to accommodate two people comfortably large, but in many smaller bedrooms, a bed of this size means little space for other furniture. A twin bed with drawers underneath will help you regain some lost storage space without compromising on comfort double bed giving.

Twin Bed with Drawers Underneath and Headboard

Twin Bed with Drawers Underneath and Headboard

Instructions

12 Inspiration Gallery from Making Twin Bed with Drawers Underneath

Image of: Twin Bed with Drawers Underneath and Headboard
Image of: Twin Bed with Drawers Underneath Black
Image of: Twin Bed with Drawers Underneath Brown
Image of: Twin Bed with Drawers Underneath Design
Image of: Twin Bed with Drawers Underneath DIY
Image of: Twin Bed with Drawers Underneath Low
Image of: Twin Bed with Drawers Underneath Oak
Image of: Twin Bed with Drawers Underneath Plans
Image of: Twin Bed with Drawers Underneath Rustic
Image of: Twin Bed with Drawers Underneath Solid Wood
Image of: Twin Bed with Drawers Underneath White
Image of: Twin Bed with Drawers Underneath Wood
 

Cut four 2-to-4-58 inches long, using a circular saw. Cut four pieces to 80 inches. Cutting four to 10 inches. Place 1-inch layer control in the router. These are tracks in which the slats to keep the mattress fit. Interlock the 58-inch and 80-inch pieces of the grooves to form two rectangular frames. Make lamina tracks meet.

Fix the joints of the frames with countersunk long screws and a hammer drill with a screwdriver bit. Coat end surfaces of the 10-inch pieces of wood glue. Stick the 10-inch pieces to the corners of the rectangular frames to form the twin bed with drawers underneath with a 10-inch piece that every corner supports that hold the frames apart. Reinforce the joints with countersunk long screws.

Related  Tips for DIY Under Bed Drawers to Make It Work Effectively

Place a 10-inch piece in the middle of each vertical surface of the bed frame. Reinforce the joints with countersunk long screws. These are support pieces to prevent the drawer to fall down inside the bed when closed. Nail the first strip of slat track at the end of the bed.  Continue nailing fins with 2-inch space between them until you reach the bottom of the bed.

Comments are closed.