Make a Foundation Bed with Drawers Queen
Bed with drawers queen – A bed foundation with drawers is an ideal solution for small rooms or someone who has a lot of items to store, but not enough space to put them all in. Since the drawers can store bedding, clothes or other objects, a bed with drawers removes the need for a separate chest of drawers in the room. As a result, small bedroom and guest bedroom accommodate a larger bed without worrying about other furniture that does not fit.
Make a foundation bed with drawers queen, cut four 2-by-4s to 75 inches in length with a circular saw. Cut four 2-by-4s to 54 inches in length and seven 2-by-4s to 10 inches. Cut a 2-for-4-71 inches in length and two 2-by-4s to 16 inches. Measure and draw a 1-by-1-inch square at each end of the 2-inch wide faces 75- and 54-inch-long pieces. Cut rectangles out with a hacksaw. Measure and cut two slices of 1-inch-thick hardwood to 75 inches in length and 18 inches wide with a circular saw.
After that to make a foundation bed with drawers’ queen, attach a 1-inch layer control to the router. Cut 1-inch-deep grooves at the edges of two of the 75-inch-long 2-by-4 pieces. Apply wood glue to the cut grooves. Create a second rectangle from the remaining 75- and 54-inch-long pieces. Reinforce the glued joints on both rectangles with a hammer drill fitted with a screwdriver, drill and long screws. Countersink screws to hold the surfaces of flat wood. Glue two of the 10-inch-long pieces together to make a piece that is 10 inches long, 2 inches wide and 2 inches thick. Determine which side of the bed boxes will be on.