King storage platform bed – There are many different designs of the platform beds there, with some storage, some without. Commercially made platform beds are generally quite expensive, and with built-in storage are even more so. Why not save money and make your own? If you use ready-made storage cubbies in the bottom and dash; your new storage platform bed just became a whole lot easier.
how to build king storage platform bed, do cubby units in a rectangle, which cubby hole pointing outwards, of the two 75-inch units placed on either side of the 15-inch cubic cubbies, form a rectangular frame, 45 x 75 inches. Gluing wooden planks on the inside of cubbies. Planks are screw anchors, so they must be adjacent to each other on the walls of cubbies: one each on the top and bottom of the side walls of the cubic cubby, one at the top and bottom of the sides adjacent the cubic cubby, on the inside of the long cubby units.
12 Photos Gallery of: Ideas for Build King Storage Platform Bed
After that to build king storage platform bed, pre-drill two holes through each anchor. These holes will go through the armature, through the wall of cubby and into the adjacent screw anchor on the second cubby wall. Screw cubby storage device context with the help of the predrilled holes. Put shelf brackets along the sides of the interior of the frame, and frac12; inch below the rim. There will be 45 inches on the sides of the interior of the frame, place the brackets on each side, with ten inches between them, so that they will support the wooden slats. Screw the brackets to the sides of the frame.