How to Make Twin Bed Drawers
Twin bed drawers – In small room, to suit both a bed and a place to store clothes can be difficult, if not impossible. One option is to build twin bed with drawers in the bottom of it. Twin bed frames the space between the mattress and the floor for storage. Some twin beds have storage boxes, while others have cubbyholes. Building a bed with cubbyholes is easier than building one with drawers. When you build the frame, sliding storage boxes in cubbyholes create the appearance of boxes without additional work.
Twin bed drawers, place the four 2-by-12-inch wooden boards on the ground parallel to each other. Resting on board each of the 2-inch sides. Space the boards about 20 inches apart. Examine a piece of plywood and determine which side is the smoothest. Place the plywood on top of four boards, smooth side up. The two 12-by-2-inch boards on the ends should line up evenly with plywood is short sides.
Twin bed drawers, attach the boards to the plywood with a drill and screws. Use three screws per wooden board. Place a screw in each end of the wooden boards and in the middle. Turn the plywood and wood boards over, so that the smooth surface of plywood is flat on the ground and the four boards sticking up.