Making Folding Counter Stools
Folding counter stools – A simple stool that folds for storage, packing the car for sporting events or attach to a backpack for camping is easy to do. Save money by building your own, you should take more than an hour.
Making folding counter stools, Measure and mark the center of the four boards 2 meters high, 1 foot at each end. Connect the bit to your drill and drill a whole straight through each of the four tables at the point marked. Battery of a board 2 feet on another and align the holes drilled. Slip one of the bolts through the two holes and attach a nut to the bolt where it exits on the other side. Place the two units of the leg on a flat surface parallel to each other. Space units 18 inches apart and slide the gasket 18 inches between them. Place the board 18 inches along the top.
Set the 26 – inch board against the top of the tables 2 feet to run next to the board 18 inches. Screw through the 26-inch board at each end and at the ends of the outer tables of each leg drive. Open the frame folding counter stools so the cross braces are attached just spaced 18 inches apart. Place your canvas material over the frame. Wrapping the edge of the material around the bottom of each staple holder and every 2 inches to ensure the seat material.